CATEGORY
CATEGORY
CATEGORY
Our Materials
Our Materials
Our Materials
rABS PCR Pellet: Black Recycled ABS from Household Appliance Feedstock
rABS PCR Pellet: Black Recycled ABS from Household Appliance Feedstock
rABS PCR Pellet: Black Recycled ABS from Household Appliance Feedstock
Regenport's rABS PCR Pellet is a black post-consumer ABS resin recovered from household appliance feedstock in South Korea. It has an MFI of 14.3 g/10min and a density of 1.05 g/cm³, with monthly availability of 10 MT, and is listed for car parts, blinker, and general injection molding applications.
PCR ABS is a recycled acrylonitrile butadiene styrene feedstock recovered from post-consumer sources, then sorted, cleaned, and pelletized for reuse. Regenport's rABS PCR Pellet is recovered from household appliances and reprocessed into a black pellet in South Korea. It is supplied in resin form with an MFI of 14.3 g/10min, a density of 1.05 g/cm³, and monthly availability of up to 10 MT.
ABS is widely used in household appliance housings and internal components — items such as vacuum cleaner bodies, kitchen appliance casings, and monitor or TV enclosures are commonly molded from ABS. Because these products are produced and discarded in large volumes, decommissioned household appliances are a recurring source of post-consumer ABS scrap, which is then collected, shredded, and reprocessed into pellet form such as this lot.
Material Data
rABS (Regenport material catalog #63) | |
|---|---|
CONDITION : | TYPE : |
FEEDSTOCK: | APPLICATION : |
MFI(200°C, 5kg) : | DENSITY: |
Application Fit
An MFI of 14.3 g/10min indicates a relatively fast-flowing melt, which is generally relevant for injection-molded parts with thinner walls or more detailed geometry — consistent with the listed applications of car parts, blinker components, and general injection molding. The density of 1.05 g/cm³ is within the standard range for ABS resin. As a black pellet, the material is listed for functional or non-visible parts rather than applications requiring specific color or transparency.
ABS is a common material choice for automotive interior and exterior trim, including blinker (turn signal) housings, due to its combination of impact resistance and dimensional stability, and the same properties make it broadly usable in general injection-molded parts across other industries. Buyers considering this lot for such uses would typically confirm melt flow and mechanical properties against their own line and part requirements, since processing behavior can vary by equipment and part design even within the same MFI range.
Sample and Datasheet Request
Regenport's rABS PCR Pellet is available for sample or datasheet requests. Buyers evaluating this material for car parts, blinker, or general injection molding production can request a sample to test against current line conditions. Inquiries are typically answered within 24 hours.
PCR ABS is a recycled acrylonitrile butadiene styrene feedstock recovered from post-consumer sources, then sorted, cleaned, and pelletized for reuse. Regenport's rABS PCR Pellet is recovered from household appliances and reprocessed into a black pellet in South Korea. It is supplied in resin form with an MFI of 14.3 g/10min, a density of 1.05 g/cm³, and monthly availability of up to 10 MT.
ABS is widely used in household appliance housings and internal components — items such as vacuum cleaner bodies, kitchen appliance casings, and monitor or TV enclosures are commonly molded from ABS. Because these products are produced and discarded in large volumes, decommissioned household appliances are a recurring source of post-consumer ABS scrap, which is then collected, shredded, and reprocessed into pellet form such as this lot.
Material Data
rABS (Regenport material catalog #63) | |
|---|---|
CONDITION : | TYPE : |
FEEDSTOCK: | APPLICATION : |
MFI(200°C, 5kg) : | DENSITY: |
Application Fit
An MFI of 14.3 g/10min indicates a relatively fast-flowing melt, which is generally relevant for injection-molded parts with thinner walls or more detailed geometry — consistent with the listed applications of car parts, blinker components, and general injection molding. The density of 1.05 g/cm³ is within the standard range for ABS resin. As a black pellet, the material is listed for functional or non-visible parts rather than applications requiring specific color or transparency.
ABS is a common material choice for automotive interior and exterior trim, including blinker (turn signal) housings, due to its combination of impact resistance and dimensional stability, and the same properties make it broadly usable in general injection-molded parts across other industries. Buyers considering this lot for such uses would typically confirm melt flow and mechanical properties against their own line and part requirements, since processing behavior can vary by equipment and part design even within the same MFI range.
Sample and Datasheet Request
Regenport's rABS PCR Pellet is available for sample or datasheet requests. Buyers evaluating this material for car parts, blinker, or general injection molding production can request a sample to test against current line conditions. Inquiries are typically answered within 24 hours.
Black rABS
Black rABS
Looking for samples or ready to source? Submit your request for pricing, availability, and technical information.
Samples • Pricing • Availability
Looking for samples or ready to source? Submit your request for pricing, availability, and technical information.
Request a Quote →
Request a Quote →
Posted by REGENPORT
REGENPORT is a global platform connecting buyers and suppliers in the recycled materials and sustainable packaging industries.
Posted by REGENPORT
REGENPORT is a global platform connecting buyers and suppliers in the recycled materials and sustainable packaging industries.
