CATEGORY

CATEGORY

Our Materials

Our Materials

Our Materials

The Eyedrop Bottle's Second Life: White rLDPE PCR Pellets for Film Applications

The Eyedrop Bottle's Second Life: White rLDPE PCR Pellets for Film Applications

The Eyedrop Bottle's Second Life: White rLDPE PCR Pellets for Film Applications

White rLDPE PCR pellets

A recycled LDPE (rLDPE) resin in white, derived from used eyedrop bottles. MFI 0.6 g/10min, density 0.92 g/cm³, South Korea listed as origin, no certification currently listed, 30 MT/month, for mulching film and stretch film evaluation.

This grade is a white rLDPE PCR resin made from used eyedrop bottles. The spec sheet identifies it as PCR and lists mulching film and stretch film as its application areas.

LDPE, or low-density polyethylene, is a flexible thermoplastic widely used in films and packaging. Recycled LDPE (rLDPE) is LDPE that has been recovered and reprocessed for use in new products — the "r" indicates recycled origin, not a specific polymer grade or blend ratio. PCR (post-consumer recycled) describes where that recycled material comes from: products that already served their intended purpose and were collected for recycling afterward. In short, LDPE identifies the polymer type, rLDPE indicates it has been recycled, and PCR identifies the source of that recycled feedstock.

The spec sheet lists a melt flow index (MFI) of 0.6 g/10 min and a density of 0.92 g/cm³. Under comparable test conditions, a lower MFI generally indicates lower melt flow and higher apparent melt viscosity. The MFI test temperature and load are not provided on the spec sheet and should be confirmed with Regenport. Processing suitability should be validated through trials on the buyer's own equipment rather than inferred from MFI and density alone.


Application and Trial Evaluation

This grade is listed for mulching film and stretch film applications. Before moving to volume production, buyers evaluating a trial order should check flow behavior, color consistency, residual odor, and compatibility with their intended formulation and processing line. Certification information is not listed on the spec sheet for this grade — see the Frequently Asked Questions section below for how to confirm documentation with Regenport.


Material Data

rLDPE PCR resin spec card - Eyedrop Bottle to pellet form

rLDPE (Regenport material catalog #27)

CONDITION :
Resin

TYPE :
PCR

FEEDSTOCK :
Eyedrop Bottle

APPLLICATION :

Mulching Film​ / Stretch Film​

MFI :
0.6 g/10min

DENSITY :
0.92 g/cm³


Supply Availability from South Korea

The spec sheet lists South Korea as the origin, with an available quantity of 30 MT per month. When submitting an RFQ, include the required volume, intended application (mulching film or stretch film), delivery destination, and preferred delivery schedule. For repeat purchasing, discuss lot-to-lot consistency requirements and any agreed acceptance criteria before finalizing supply arrangements. The listed monthly quantity should be treated as a reference for sourcing discussions rather than a confirmed allocation for a particular order.


A Practical PCR Option for Mulching and Stretch Film Evaluation

This rLDPE grade is one option for buyers reviewing recycled content for mulching film or stretch film applications. A 1 kg sample is available at no material charge, with freight paid by the buyer; additional samples are available on request. If a larger quantity is needed for a film-line trial, contact Regenport to confirm quantity and any applicable charges. Buyers should review their sample evaluation results alongside the agreed material specifications, documentation requirements, and supply terms before moving to a commercial purchase.


White rLDPE PCR pellet FAQ - used eyedrop bottle feedstock, certification information, monthly availability, South Korea origin

Frequently Asked Questions

What certification documentation is available for this grade? The spec sheet does not list certification information. Buyers requiring specific certifications should confirm the availability and scope of supporting documentation directly with Regenport.

What feedstock is this grade made from? It is reprocessed from used eyedrop bottles.

How much is available per month? The spec sheet lists 30 MT per month, with South Korea as the listed origin. Confirm current availability with Regenport before ordering.


Image generated with ChatGPT

This grade is a white rLDPE PCR resin made from used eyedrop bottles. The spec sheet identifies it as PCR and lists mulching film and stretch film as its application areas.

LDPE, or low-density polyethylene, is a flexible thermoplastic widely used in films and packaging. Recycled LDPE (rLDPE) is LDPE that has been recovered and reprocessed for use in new products — the "r" indicates recycled origin, not a specific polymer grade or blend ratio. PCR (post-consumer recycled) describes where that recycled material comes from: products that already served their intended purpose and were collected for recycling afterward. In short, LDPE identifies the polymer type, rLDPE indicates it has been recycled, and PCR identifies the source of that recycled feedstock.

The spec sheet lists a melt flow index (MFI) of 0.6 g/10 min and a density of 0.92 g/cm³. Under comparable test conditions, a lower MFI generally indicates lower melt flow and higher apparent melt viscosity. The MFI test temperature and load are not provided on the spec sheet and should be confirmed with Regenport. Processing suitability should be validated through trials on the buyer's own equipment rather than inferred from MFI and density alone.


Application and Trial Evaluation

This grade is listed for mulching film and stretch film applications. Before moving to volume production, buyers evaluating a trial order should check flow behavior, color consistency, residual odor, and compatibility with their intended formulation and processing line. Certification information is not listed on the spec sheet for this grade — see the Frequently Asked Questions section below for how to confirm documentation with Regenport.


Material Data

rLDPE PCR resin spec card - Eyedrop Bottle to pellet form

rLDPE (Regenport material catalog #27)

CONDITION :
Resin

TYPE :
PCR

FEEDSTOCK :
Eyedrop Bottle

APPLLICATION :

Mulching Film​ / Stretch Film​

MFI :
0.6 g/10min

DENSITY :
0.92 g/cm³


Supply Availability from South Korea

The spec sheet lists South Korea as the origin, with an available quantity of 30 MT per month. When submitting an RFQ, include the required volume, intended application (mulching film or stretch film), delivery destination, and preferred delivery schedule. For repeat purchasing, discuss lot-to-lot consistency requirements and any agreed acceptance criteria before finalizing supply arrangements. The listed monthly quantity should be treated as a reference for sourcing discussions rather than a confirmed allocation for a particular order.


A Practical PCR Option for Mulching and Stretch Film Evaluation

This rLDPE grade is one option for buyers reviewing recycled content for mulching film or stretch film applications. A 1 kg sample is available at no material charge, with freight paid by the buyer; additional samples are available on request. If a larger quantity is needed for a film-line trial, contact Regenport to confirm quantity and any applicable charges. Buyers should review their sample evaluation results alongside the agreed material specifications, documentation requirements, and supply terms before moving to a commercial purchase.


White rLDPE PCR pellet FAQ - used eyedrop bottle feedstock, certification information, monthly availability, South Korea origin

Frequently Asked Questions

What certification documentation is available for this grade? The spec sheet does not list certification information. Buyers requiring specific certifications should confirm the availability and scope of supporting documentation directly with Regenport.

What feedstock is this grade made from? It is reprocessed from used eyedrop bottles.

How much is available per month? The spec sheet lists 30 MT per month, with South Korea as the listed origin. Confirm current availability with Regenport before ordering.


Image generated with ChatGPT

Grades • Specs • Availability

White rLDPE

White rLDPE

Looking for samples or ready to source? Submit your request for pricing, availability, and technical information.

Looking for samples or ready to source? Submit your request for pricing, availability, and technical information.

Request a Quote →

Request a Quote →

Posted by REGENPORT

REGENPORT is a global platform connecting buyers and suppliers in the recycled materials and sustainable packaging industries.

Find Your Recycled Material
on REGENPORT

Find Your Recycled Material
on REGENPORT

Browse verified PCR/PIR grades, real-time pricing, and request a quote directly on our platform.

Browse verified PCR/PIR grades, real-time pricing, and request a quote directly on our platform.

CONTACT OUR TEAM

CONTACT OUR TEAM

sales@e-connect.kr

sales@e-connect.kr

We typically respond within 24 hours.

We typically respond within 24 hours.

Technical
Datasheet

Technical
Datasheet

Sample
Request

Sample
Request

Get a Quote

Get a Quote

Check
Availability

Check
Availability

Regenport

Verified recycled plastic materials

for resin manufacturers

and compounders.

CONTACT US

+82 70-7594-2321

450, Gangnam-daero,

Gangnam-gu, Seoul 06123,

Republic of Korea

Privacy Policy

Terms of Service

All Posts

© 2026 REGENPORT Inc. All rights reserved.

Regenport

Verified recycled plastic materials

for resin manufacturers

and compounders.

CONTACT US

+82 70-7594-2321

450, Gangnam-daero,

Gangnam-gu, Seoul 06123,

Republic of Korea

Privacy Policy

Terms of Service

All Posts

© 2026 REGENPORT Inc. All rights reserved.

Regenport

© 2026 REGENPORT Inc. All rights reserved.

Privacy Policy

Terms of Service

All Posts

Find Your Recycled Material on

REGENPORT

Browse verified PCR/PIR grades, real-time pricing, and request a quote directly on our platform.

CONTACT OUR TEAM

sales@e-connect.kr

We typically respond within 24 hours.