CATEGORY

CATEGORY

Our Materials

Our Materials

Our Materials

GRS-Certified Black rABS PCR Pellet from Electronic Equipment Scrap

GRS-Certified Black rABS PCR Pellet from Electronic Equipment Scrap

GRS-Certified Black rABS PCR Pellet from Electronic Equipment Scrap

Black rABS PCR pellets

Electronic equipment scrap reprocessed into black ABS pellets — GRS-certified PCR, 100 MT per month from South Korea — 1 kg sample available to order.

This black PCR rABS pellet is produced from electronic-equipment scrap and listed by the supplier for general injection molding and compounding. The supplier specification lists an MFI of 38–43 g/10 min, a density of 0.98–1.00 g/cm³, GRS certification, and monthly availability of 100 MT from South Korea. A 1 kg sample is available to order for initial material evaluation.

Buyers should assess processing suitability and documentation separately. The listed specifications are a starting point for evaluation, while the GRS certification scope, relevant lot data and destination-market requirements should be confirmed before commercial use. For EU-bound applications, GRS certification alone does not establish compliance with the EU's PBDE limits — that requires separate, relevant analytical evidence.


Processing Performance and Application Potential

The supplier lists an MFI of 38–43 g/10 min and identifies general injection molding and compounding as the intended applications. The test temperature, load and standard should be confirmed before comparing this figure with other grades.

For application qualification, ask for available mechanical and thermal data, including impact strength and heat deflection temperature, and assess black-color consistency and molding performance against the target part's requirements. Feedstock composition, sorting and any removal of coatings or non-ABS components should be confirmed with the supplier rather than inferred from the electronic-equipment feedstock description. The supplier lists a density of 0.98–1.00 g/cm³; confirm the test method and current-lot data as part of material qualification.


Material Data

rABS PCR resin spec card - Electronic equipment scrap to pellet form

rABS (Regenport material catalog #101)

CONDITION :
Resin

TYPE :
PCR

FEEDSTOCK :
Electronic Good

APPLICATION :
General Injection / Compounding

MFI :
38~43 g/10min

DENSITY :
0.98~1.00 g/cm³


GRS Certification and the PBDE Question

GRS certification covers recycled content and chain of custody, together with social, environmental and chemical-use requirements for processing. It does not, by itself, establish the PBDE content of a supplied lot or demonstrate compliance with the EU's PBDE limits — that requires separate, relevant analytical evidence. Our article on the 2027 PBDE ceiling for recycled ABS sets out the relevant figures in full.

Under Commission Delegated Regulation (EU) 2025/1482, the applicable derogation for mixtures and articles containing or made from listed-PBDE-containing recovered material sets a limit of 350 mg/kg for the sum of the five listed PBDEs, decreasing to 200 mg/kg from 30 December 2027. Different provisions apply to toys and specified childcare products, while food-contact materials are excluded from this derogation. The electronic-equipment feedstock description does not establish the PBDE content of this grade; for EU-bound applications, buyers should review analytical evidence relevant to the supplied lot and intended end use.


Supply and Sample Orders

The supplier lists availability of 100 MT per month from South Korea. For recovered-material streams, actual allocable volume can vary with collection, sorting yield, reprocessing output and existing commitments.


A PCR ABS Option to Evaluate

This grade offers a black PCR rABS option from South Korea for buyers evaluating recycled material for general injection molding or compounding. Qualification should focus on the intended part, confirmed MFI test conditions, relevant mechanical data, and the documentation required for the destination market.

A 1 kg sample is available to order. Please share your target application, processing method, destination market and expected monthly demand so we can confirm sample pricing, shipping arrangements, lead time and available documentation.


Black rABS PCR pellet FAQ - GRS certification scope, EU PBDE regulation, melt flow for general injection molding, 1 kg sample ordering

Frequently Asked Questions

Does GRS certification mean this grade meets the EU PBDE limit? No. GRS certifies recycled content and chain of custody, not PBDE compliance. That takes separate analytical evidence.

What does electronic-equipment feedstock mean for this grade? It identifies the source category only. Ask for lot-specific PBDE analysis rather than inferring compliance from the feedstock description.

Is the MFI figure enough to confirm suitability for a specific part? No. Ask for the test temperature, load and standard behind the 38–43 g/10 min range, plus trial data for your part.

Can I order a sample before placing a production order? Yes — a 1 kg sample is available to order. Contact us for pricing, shipping and lead time.


Image generated with ChatGPT

This black PCR rABS pellet is produced from electronic-equipment scrap and listed by the supplier for general injection molding and compounding. The supplier specification lists an MFI of 38–43 g/10 min, a density of 0.98–1.00 g/cm³, GRS certification, and monthly availability of 100 MT from South Korea. A 1 kg sample is available to order for initial material evaluation.

Buyers should assess processing suitability and documentation separately. The listed specifications are a starting point for evaluation, while the GRS certification scope, relevant lot data and destination-market requirements should be confirmed before commercial use. For EU-bound applications, GRS certification alone does not establish compliance with the EU's PBDE limits — that requires separate, relevant analytical evidence.


Processing Performance and Application Potential

The supplier lists an MFI of 38–43 g/10 min and identifies general injection molding and compounding as the intended applications. The test temperature, load and standard should be confirmed before comparing this figure with other grades.

For application qualification, ask for available mechanical and thermal data, including impact strength and heat deflection temperature, and assess black-color consistency and molding performance against the target part's requirements. Feedstock composition, sorting and any removal of coatings or non-ABS components should be confirmed with the supplier rather than inferred from the electronic-equipment feedstock description. The supplier lists a density of 0.98–1.00 g/cm³; confirm the test method and current-lot data as part of material qualification.


Material Data

rABS PCR resin spec card - Electronic equipment scrap to pellet form

rABS (Regenport material catalog #101)

CONDITION :
Resin

TYPE :
PCR

FEEDSTOCK :
Electronic Good

APPLICATION :
General Injection / Compounding

MFI :
38~43 g/10min

DENSITY :
0.98~1.00 g/cm³


GRS Certification and the PBDE Question

GRS certification covers recycled content and chain of custody, together with social, environmental and chemical-use requirements for processing. It does not, by itself, establish the PBDE content of a supplied lot or demonstrate compliance with the EU's PBDE limits — that requires separate, relevant analytical evidence. Our article on the 2027 PBDE ceiling for recycled ABS sets out the relevant figures in full.

Under Commission Delegated Regulation (EU) 2025/1482, the applicable derogation for mixtures and articles containing or made from listed-PBDE-containing recovered material sets a limit of 350 mg/kg for the sum of the five listed PBDEs, decreasing to 200 mg/kg from 30 December 2027. Different provisions apply to toys and specified childcare products, while food-contact materials are excluded from this derogation. The electronic-equipment feedstock description does not establish the PBDE content of this grade; for EU-bound applications, buyers should review analytical evidence relevant to the supplied lot and intended end use.


Supply and Sample Orders

The supplier lists availability of 100 MT per month from South Korea. For recovered-material streams, actual allocable volume can vary with collection, sorting yield, reprocessing output and existing commitments.


A PCR ABS Option to Evaluate

This grade offers a black PCR rABS option from South Korea for buyers evaluating recycled material for general injection molding or compounding. Qualification should focus on the intended part, confirmed MFI test conditions, relevant mechanical data, and the documentation required for the destination market.

A 1 kg sample is available to order. Please share your target application, processing method, destination market and expected monthly demand so we can confirm sample pricing, shipping arrangements, lead time and available documentation.


Black rABS PCR pellet FAQ - GRS certification scope, EU PBDE regulation, melt flow for general injection molding, 1 kg sample ordering

Frequently Asked Questions

Does GRS certification mean this grade meets the EU PBDE limit? No. GRS certifies recycled content and chain of custody, not PBDE compliance. That takes separate analytical evidence.

What does electronic-equipment feedstock mean for this grade? It identifies the source category only. Ask for lot-specific PBDE analysis rather than inferring compliance from the feedstock description.

Is the MFI figure enough to confirm suitability for a specific part? No. Ask for the test temperature, load and standard behind the 38–43 g/10 min range, plus trial data for your part.

Can I order a sample before placing a production order? Yes — a 1 kg sample is available to order. Contact us for pricing, shipping and lead time.


Image generated with ChatGPT

Grades • Specs • Availability

Black rABS

Black rABS

Looking for samples or ready to source? Submit your request for pricing, availability, and technical information.

Looking for samples or ready to source? Submit your request for pricing, availability, and technical information.

Request a Quote →

Request a Quote →

Posted by REGENPORT

REGENPORT is a global platform connecting buyers and suppliers in the recycled materials and sustainable packaging industries.

Find Your Recycled Material
on REGENPORT

Find Your Recycled Material
on REGENPORT

Browse verified PCR/PIR grades, real-time pricing, and request a quote directly on our platform.

Browse verified PCR/PIR grades, real-time pricing, and request a quote directly on our platform.

CONTACT OUR TEAM

CONTACT OUR TEAM

sales@e-connect.kr

sales@e-connect.kr

We typically respond within 24 hours.

We typically respond within 24 hours.

Technical
Datasheet

Technical
Datasheet

Sample
Request

Sample
Request

Get a Quote

Get a Quote

Check
Availability

Check
Availability

Regenport

Verified recycled plastic materials

for resin manufacturers

and compounders.

CONTACT US

+82 70-7594-2321

450, Gangnam-daero,

Gangnam-gu, Seoul 06123,

Republic of Korea

Privacy Policy

Terms of Service

All Posts

© 2026 REGENPORT Inc. All rights reserved.

Regenport

Verified recycled plastic materials

for resin manufacturers

and compounders.

CONTACT US

+82 70-7594-2321

450, Gangnam-daero,

Gangnam-gu, Seoul 06123,

Republic of Korea

Privacy Policy

Terms of Service

All Posts

© 2026 REGENPORT Inc. All rights reserved.

Regenport

© 2026 REGENPORT Inc. All rights reserved.

Privacy Policy

Terms of Service

All Posts

Find Your Recycled Material on

REGENPORT

Browse verified PCR/PIR grades, real-time pricing, and request a quote directly on our platform.

CONTACT OUR TEAM

sales@e-connect.kr

We typically respond within 24 hours.