CATEGORY

CATEGORY

Regulation

Regulation

Regulation

Japan's Plastic Design Certification: What Recycled PP and PE Refill Containers Must Prove to Qualify

Japan's Plastic Design Certification: What Recycled PP and PE Refill Containers Must Prove to Qualify

Japan's Plastic Design Certification: What Recycled PP and PE Refill Containers Must Prove to Qualify

Recycled PP bottle, PE bottle, and PP/PE refill pouch beside Japan's Design Certification badge

Japan's plastic law has been on the books since 2022, but following its design guidelines was voluntary — nothing checked whether a product actually did. That changed on 24 January 2026, when a new certification scheme took effect. Two of its four product categories are built specifically around refillable PP and PE containers, with recycled-content thresholds attached — and the government has already certified the first 18 products.

Japan's Act on Promotion of Resource Circulation for Plastics (Act No. 60 of 2021) took effect on 1 April 2022. It laid out Design for the Environment (DfE) guidelines covering a plastic product's whole lifecycle, from design to disposal.

But for nearly four years, following those guidelines was voluntary. No government process checked whether a given product actually met them.

That changed with a joint notification from Japan's Ministry of Economy, Trade and Industry (METI) and Ministry of Agriculture, Forestry and Fisheries (MAFF). It was published 24 July 2025 and notified to the WTO as G/TBT/N/JPN/863.

The notification set certification criteria for four product categories. It took effect 24 January 2026, confirmed in the notification's addendum, G/TBT/N/JPN/863/Add.1.

Products that meet the criteria can now be certified. Certified products get preferential treatment under Japan's Act on Promoting Green Procurement, plus potential government support toward recycling-facility investment.


Japan's four certified categories and resins: PET bottles (PET body), stationery (any plastic), cosmetic/cleaning containers (PET/PP/PE)

Four categories, and two of them are built around PP and PE

The scheme certifies:

  • PET beverage bottles

  • Stationery and office supplies

  • Household cosmetic containers (shampoo, hair conditioner, body wash, hand soap)

  • Household cleaning-agent containers (laundry detergent, fabric softener, kitchen and dishwasher detergent)

The first category is PET-specific by definition. But the two household-container categories both name PET, PP, and PE as acceptable resins. For rigid refill bottles specifically, a single-material requirement narrows the field in practice — refill bottles for these products are overwhelmingly PP or PE, not PET.

That makes this the first Japan-origin regulatory post on this track built around Regenport's core grades rather than PET.


What qualifies as "excellent" — category by category

There's no single national rate. Each category sets its own threshold, structured around the role a container plays — a permanent "body" container meant to be refilled, versus the refill pack itself — not just its resin.


Household cosmetic container recycled-content rules — 10–50% body, 15–60% bottle refill, 5–15% film refill, by route

Household cosmetic containers

Household cosmetic containers (shampoo, conditioner, body wash, hand soap) offer two routes per container type. One needs more recycled content. The other needs less content, paired with a stricter lightweighting target instead. The criteria document doesn't label these with grades or stars — they're simply two numbered options a manufacturer can choose between.

For resin suppliers, the higher-content route matters most. It sets the higher recycled-content thresholds a buyer is likely sourcing toward:

Container role

Lower-content / stricter-lightweighting route

Higher-content route

Body container (the reusable permanent container)

10%+

50%+

Bottle-type refill container

15%+

60%+

Film-type refill pouch

5%+

15%+

A manufacturer can qualify through either route, for each container type. The lower-content route isn't "easier" overall — it trades a lower recycled-content figure for a stricter lightweighting cap, not a looser one.

Pre-consumer recycled content counts at half weight compared to post-consumer content, on the higher-content (50%/60%/15%) routes. On the lower-content routes, pre-consumer, post-consumer, and biomass plastic all count equally, with no weighting.

Acceptable resins for the body container and bottle-shaped refill are PET, PE, or PP. Each must also meet Japan's own food-additive compliance standard (MHW Notification No. 370), and the body materials must be separable from the cap, dispenser, and packaging.

For cosmetic-container body bottles and bottle-type refills, on either route, PE and PP must have a specific gravity under 0.97 g/cm³. This appears aimed at catching heavily filled or non-equivalent compounds, not just confirming resin family — and it doesn't apply to film-type refill pouches.

Colour is restricted too: PET must be uncoloured, and PE or PP must be uncoloured or white.

That 0.97 g/cm³ ceiling is worth flagging on its own. Most LDPE and PP grades clear it comfortably. HDPE runs closer to the line — some grades are specified up to 0.965–0.970 g/cm³ before fillers are even counted. A buyer sourcing recycled HDPE for a cosmetic refill bottle has a concrete reason to check batch-level density, rather than assume compliance from resin family alone.


Household cleaning-agent container rules — 25%+ or lightweighting (rigid refill), ~10% (laminated film), lightweighting only (mono-film)

Household cleaning-agent containers

Household cleaning-agent containers (laundry detergent, fabric softener, kitchen and dishwasher detergent) work differently, and less uniformly.

A rigid refill body container can reach 25%+ recycled content, or qualify instead through a lightweighting-only path. A laminated multi-material film refill can reach roughly 10%. A mono-material film refill carries no recycled-content requirement at all — it qualifies on weight-reduction targets instead.

More notably: in the criteria we reviewed, laundry detergent and fabric softener are only certifiable through the refillable main-container and film-refill routes. The bottle-shaped and other rigid-refill routes are reserved for dishwashing, kitchen, and general household-cleaner products.

Acceptable resins for rigid formats are PET, PP, PE, or PS, as a single material. PVC, polyvinylidene, other organic chlorine compounds, and aluminium foil are excluded. Unlike the household-cosmetic criteria, this category doesn't impose a 0.97 g/cm³ specific-gravity ceiling on PE or PP.


PET bottle rules — PET-only body, 15%+ recycled/biomass content, caps and handles under 1.0 g/cm³

PET beverage bottles

PET beverage bottles sit apart from both. Recycled or biomass content must reach 15%+ of the bottle's own total weight — not an annual company-wide figure — plus a lightweighting formula that varies by bottle type.

A separate, more lenient density rule applies to caps and handles: PE or PP caps, and uncoloured PET, PE, or PP handles, must have a specific gravity under 1.0 g/cm³. The criteria document doesn't explain why. In practice, this is the density range that floats during water-based sink/float sorting of shredded plastic, separating it from PET, which sinks — but that's industry context, not something the document itself states.


Japan's first 18 certified products (Feb 2026), including Suntory's recycled-PET bottle and Kao's Attack ZERO, EMAL, Bioré u

Already in force, already certifying real products

This isn't a proposal still moving through consultation. On 10 February 2026, METI and MAFF granted the scheme's first 18 certifications.

Suntory Beverage & Food's GREEN DA·KA·RA Gentle Barley Tea 680 ml PET bottle was one of them (certification no. PLA000002, built on 100% recycled PET). The same day also brought the first awards under the stationery, cosmetic-container, and cleaning-container categories.

Kao Corporation's own announcement (27 February 2026) names three of those certified products directly: the laundry detergents Attack ZERO and EMAL, plus Bioré u Foaming Hand Wash — a hand soap, squarely in the household cosmetic-container category. Together they cover 11 certified SKUs.

Laundry detergent, per the criteria, is only certifiable through the refillable main-container or film-refill routes. So Attack ZERO and EMAL were very likely certified as refill formats, not rigid bottles. Either way, these aren't hypothetical compliance targets — they're on shelves now, under this certification.


Resin info buyers may request — colour/density, PCR/PIR split, container role, excluded additives

What this means for a supplier of recycled PP or HDPE resin

Nothing in this scheme places a direct obligation on a resin supplier. Certification applies to the finished container, and a brand owner is the one who applies for it.

But a brand pursuing certification for a refill pack needs documentation further up its supply chain than a general spec sheet provides.

For a marketplace like Regenport — supplying recycled HDPE, LDPE, and PP to buyers that may include Japanese cosmetic and household-goods brands — that's likely to surface as buyers asking for:

  • Confirmed resin colour and a batch-level specific-gravity figure, not just a general spec sheet. The under-0.97 g/cm³ ceiling (for cosmetic-container PP/PE) is checked per product, not assumed from resin family.

  • A clear PCR/PIR split by weight. The two aren't interchangeable on the higher-content route — pre-consumer material counts at half the weight of post-consumer material once a buyer is targeting that route's 50%/60%/15% thresholds.

  • Confirmation of which container role and route a batch is destined for. A buyer building a mono-material film refill for laundry detergent or fabric softener may find no recycled-content percentage applies at all (lightweighting only) — but the same buyer's main refillable container or laminated-film line, or its dishwashing/kitchen-cleaner products, do carry a content requirement. Worth confirming per route, not assuming uniformly.

  • Confirmation that no PVC, non-plastic material, or excluded additive is present in the resin as supplied.

  • Advance notice of which grades are already supplied uncoloured or white. Cosmetic-container PE/PP is restricted to exactly those two options, so recolouring a resin isn't something a buyer wants to discover midway through their own certification review.

Regenport lists recycled HDPE grades with resin colour, density, and PCR/PIR classification visible per lot; buyers can request batch-level documentation before sampling.


FAQ on Japan's plastic design certification scheme

Frequently Asked Questions

What is Japan's plastic design certification scheme? A government scheme under the Act on Promotion of Resource Circulation for Plastics that certifies "excellent" eco-design for four plastic product categories, with criteria notified to the WTO in 2025 and in force since 24 January 2026.

Does it set a recycled-content percentage? Yes, but there's no single flat number — it varies by category, container role, and compliance route, from 0% up to 60%. See the category-by-category breakdown above for the exact thresholds.

Does it cover PP and HDPE, not just PET? Yes. Household cosmetic and cleaning-agent containers both list PET, PP, and PE as acceptable resins, and refillable formats in practice favour PP and PE bottles over PET.

Has anything actually been certified yet? Yes — the first 18 products were certified on 10 February 2026. Named examples include Suntory's GREEN DA·KA·RA Gentle Barley Tea PET bottle and three Kao products: Attack ZERO, EMAL, and Bioré u Foaming Hand Wash.

Is certification mandatory? No. It's voluntary, but certified products qualify for preferential treatment under Japan's Green Purchasing Law, plus potential support toward recycling-facility investment.


About this guide

Current as of November 2026, for general information only — not legal advice. Specific compliance determinations should be verified against METI and MAFF's published criteria and the WTO notification text.


Image generated with ChatGPT

Sources

METI, official press release (24 July 2025) — the final, in-effect design-certification criteria for all four product categories → Press release · PET bottles · Stationery · Cosmetic containers · Cleaning containers

Kao Corporation, official announcement (27 February 2026) — names the first certified products (Attack ZERO, EMAL, Bioré u Foaming Hand Wash) → Read the Source

PETnology, "Japan has granted the first certification under the design certification scheme" — confirms the first 18 certifications, 10 February 2026 → Read the Source

Packaging Europe, "Japan reveals certification criteria for PET bottles, cosmetics and more" — cross-check on effective date and resin restrictions → Read the Source

Japan's Act on Promotion of Resource Circulation for Plastics (Act No. 60 of 2021) took effect on 1 April 2022. It laid out Design for the Environment (DfE) guidelines covering a plastic product's whole lifecycle, from design to disposal.

But for nearly four years, following those guidelines was voluntary. No government process checked whether a given product actually met them.

That changed with a joint notification from Japan's Ministry of Economy, Trade and Industry (METI) and Ministry of Agriculture, Forestry and Fisheries (MAFF). It was published 24 July 2025 and notified to the WTO as G/TBT/N/JPN/863.

The notification set certification criteria for four product categories. It took effect 24 January 2026, confirmed in the notification's addendum, G/TBT/N/JPN/863/Add.1.

Products that meet the criteria can now be certified. Certified products get preferential treatment under Japan's Act on Promoting Green Procurement, plus potential government support toward recycling-facility investment.


Japan's four certified categories and resins: PET bottles (PET body), stationery (any plastic), cosmetic/cleaning containers (PET/PP/PE)

Four categories, and two of them are built around PP and PE

The scheme certifies:

  • PET beverage bottles

  • Stationery and office supplies

  • Household cosmetic containers (shampoo, hair conditioner, body wash, hand soap)

  • Household cleaning-agent containers (laundry detergent, fabric softener, kitchen and dishwasher detergent)

The first category is PET-specific by definition. But the two household-container categories both name PET, PP, and PE as acceptable resins. For rigid refill bottles specifically, a single-material requirement narrows the field in practice — refill bottles for these products are overwhelmingly PP or PE, not PET.

That makes this the first Japan-origin regulatory post on this track built around Regenport's core grades rather than PET.


What qualifies as "excellent" — category by category

There's no single national rate. Each category sets its own threshold, structured around the role a container plays — a permanent "body" container meant to be refilled, versus the refill pack itself — not just its resin.


Household cosmetic container recycled-content rules — 10–50% body, 15–60% bottle refill, 5–15% film refill, by route

Household cosmetic containers

Household cosmetic containers (shampoo, conditioner, body wash, hand soap) offer two routes per container type. One needs more recycled content. The other needs less content, paired with a stricter lightweighting target instead. The criteria document doesn't label these with grades or stars — they're simply two numbered options a manufacturer can choose between.

For resin suppliers, the higher-content route matters most. It sets the higher recycled-content thresholds a buyer is likely sourcing toward:

Container role

Lower-content / stricter-lightweighting route

Higher-content route

Body container (the reusable permanent container)

10%+

50%+

Bottle-type refill container

15%+

60%+

Film-type refill pouch

5%+

15%+

A manufacturer can qualify through either route, for each container type. The lower-content route isn't "easier" overall — it trades a lower recycled-content figure for a stricter lightweighting cap, not a looser one.

Pre-consumer recycled content counts at half weight compared to post-consumer content, on the higher-content (50%/60%/15%) routes. On the lower-content routes, pre-consumer, post-consumer, and biomass plastic all count equally, with no weighting.

Acceptable resins for the body container and bottle-shaped refill are PET, PE, or PP. Each must also meet Japan's own food-additive compliance standard (MHW Notification No. 370), and the body materials must be separable from the cap, dispenser, and packaging.

For cosmetic-container body bottles and bottle-type refills, on either route, PE and PP must have a specific gravity under 0.97 g/cm³. This appears aimed at catching heavily filled or non-equivalent compounds, not just confirming resin family — and it doesn't apply to film-type refill pouches.

Colour is restricted too: PET must be uncoloured, and PE or PP must be uncoloured or white.

That 0.97 g/cm³ ceiling is worth flagging on its own. Most LDPE and PP grades clear it comfortably. HDPE runs closer to the line — some grades are specified up to 0.965–0.970 g/cm³ before fillers are even counted. A buyer sourcing recycled HDPE for a cosmetic refill bottle has a concrete reason to check batch-level density, rather than assume compliance from resin family alone.


Household cleaning-agent container rules — 25%+ or lightweighting (rigid refill), ~10% (laminated film), lightweighting only (mono-film)

Household cleaning-agent containers

Household cleaning-agent containers (laundry detergent, fabric softener, kitchen and dishwasher detergent) work differently, and less uniformly.

A rigid refill body container can reach 25%+ recycled content, or qualify instead through a lightweighting-only path. A laminated multi-material film refill can reach roughly 10%. A mono-material film refill carries no recycled-content requirement at all — it qualifies on weight-reduction targets instead.

More notably: in the criteria we reviewed, laundry detergent and fabric softener are only certifiable through the refillable main-container and film-refill routes. The bottle-shaped and other rigid-refill routes are reserved for dishwashing, kitchen, and general household-cleaner products.

Acceptable resins for rigid formats are PET, PP, PE, or PS, as a single material. PVC, polyvinylidene, other organic chlorine compounds, and aluminium foil are excluded. Unlike the household-cosmetic criteria, this category doesn't impose a 0.97 g/cm³ specific-gravity ceiling on PE or PP.


PET bottle rules — PET-only body, 15%+ recycled/biomass content, caps and handles under 1.0 g/cm³

PET beverage bottles

PET beverage bottles sit apart from both. Recycled or biomass content must reach 15%+ of the bottle's own total weight — not an annual company-wide figure — plus a lightweighting formula that varies by bottle type.

A separate, more lenient density rule applies to caps and handles: PE or PP caps, and uncoloured PET, PE, or PP handles, must have a specific gravity under 1.0 g/cm³. The criteria document doesn't explain why. In practice, this is the density range that floats during water-based sink/float sorting of shredded plastic, separating it from PET, which sinks — but that's industry context, not something the document itself states.


Japan's first 18 certified products (Feb 2026), including Suntory's recycled-PET bottle and Kao's Attack ZERO, EMAL, Bioré u

Already in force, already certifying real products

This isn't a proposal still moving through consultation. On 10 February 2026, METI and MAFF granted the scheme's first 18 certifications.

Suntory Beverage & Food's GREEN DA·KA·RA Gentle Barley Tea 680 ml PET bottle was one of them (certification no. PLA000002, built on 100% recycled PET). The same day also brought the first awards under the stationery, cosmetic-container, and cleaning-container categories.

Kao Corporation's own announcement (27 February 2026) names three of those certified products directly: the laundry detergents Attack ZERO and EMAL, plus Bioré u Foaming Hand Wash — a hand soap, squarely in the household cosmetic-container category. Together they cover 11 certified SKUs.

Laundry detergent, per the criteria, is only certifiable through the refillable main-container or film-refill routes. So Attack ZERO and EMAL were very likely certified as refill formats, not rigid bottles. Either way, these aren't hypothetical compliance targets — they're on shelves now, under this certification.


Resin info buyers may request — colour/density, PCR/PIR split, container role, excluded additives

What this means for a supplier of recycled PP or HDPE resin

Nothing in this scheme places a direct obligation on a resin supplier. Certification applies to the finished container, and a brand owner is the one who applies for it.

But a brand pursuing certification for a refill pack needs documentation further up its supply chain than a general spec sheet provides.

For a marketplace like Regenport — supplying recycled HDPE, LDPE, and PP to buyers that may include Japanese cosmetic and household-goods brands — that's likely to surface as buyers asking for:

  • Confirmed resin colour and a batch-level specific-gravity figure, not just a general spec sheet. The under-0.97 g/cm³ ceiling (for cosmetic-container PP/PE) is checked per product, not assumed from resin family.

  • A clear PCR/PIR split by weight. The two aren't interchangeable on the higher-content route — pre-consumer material counts at half the weight of post-consumer material once a buyer is targeting that route's 50%/60%/15% thresholds.

  • Confirmation of which container role and route a batch is destined for. A buyer building a mono-material film refill for laundry detergent or fabric softener may find no recycled-content percentage applies at all (lightweighting only) — but the same buyer's main refillable container or laminated-film line, or its dishwashing/kitchen-cleaner products, do carry a content requirement. Worth confirming per route, not assuming uniformly.

  • Confirmation that no PVC, non-plastic material, or excluded additive is present in the resin as supplied.

  • Advance notice of which grades are already supplied uncoloured or white. Cosmetic-container PE/PP is restricted to exactly those two options, so recolouring a resin isn't something a buyer wants to discover midway through their own certification review.

Regenport lists recycled HDPE grades with resin colour, density, and PCR/PIR classification visible per lot; buyers can request batch-level documentation before sampling.


FAQ on Japan's plastic design certification scheme

Frequently Asked Questions

What is Japan's plastic design certification scheme? A government scheme under the Act on Promotion of Resource Circulation for Plastics that certifies "excellent" eco-design for four plastic product categories, with criteria notified to the WTO in 2025 and in force since 24 January 2026.

Does it set a recycled-content percentage? Yes, but there's no single flat number — it varies by category, container role, and compliance route, from 0% up to 60%. See the category-by-category breakdown above for the exact thresholds.

Does it cover PP and HDPE, not just PET? Yes. Household cosmetic and cleaning-agent containers both list PET, PP, and PE as acceptable resins, and refillable formats in practice favour PP and PE bottles over PET.

Has anything actually been certified yet? Yes — the first 18 products were certified on 10 February 2026. Named examples include Suntory's GREEN DA·KA·RA Gentle Barley Tea PET bottle and three Kao products: Attack ZERO, EMAL, and Bioré u Foaming Hand Wash.

Is certification mandatory? No. It's voluntary, but certified products qualify for preferential treatment under Japan's Green Purchasing Law, plus potential support toward recycling-facility investment.


About this guide

Current as of November 2026, for general information only — not legal advice. Specific compliance determinations should be verified against METI and MAFF's published criteria and the WTO notification text.


Image generated with ChatGPT

Sources

METI, official press release (24 July 2025) — the final, in-effect design-certification criteria for all four product categories → Press release · PET bottles · Stationery · Cosmetic containers · Cleaning containers

Kao Corporation, official announcement (27 February 2026) — names the first certified products (Attack ZERO, EMAL, Bioré u Foaming Hand Wash) → Read the Source

PETnology, "Japan has granted the first certification under the design certification scheme" — confirms the first 18 certifications, 10 February 2026 → Read the Source

Packaging Europe, "Japan reveals certification criteria for PET bottles, cosmetics and more" — cross-check on effective date and resin restrictions → Read the Source

Explore Related Materials

Grades • Specs • Availability

Browse rHDPE →

Explore Related Materials

Explore Related Materials

GRS-certified rHDPE grades with resin colour, density, and PCR/PIR classification for review.

GRS-certified rHDPE grades with resin colour, density, and PCR/PIR classification for review.

Browse rHDPE →

Browse rHDPE →

Looking for samples or ready to source? Submit your request for pricing, availability, and technical information.

Looking for samples or ready to source? Submit your request for pricing, availability, and technical information.

Request a Quote →

Request a Quote →

Posted by REGENPORT

REGENPORT is a global platform connecting buyers and suppliers in the recycled materials and sustainable packaging industries.

Find Your Recycled Material
on REGENPORT

Find Your Recycled Material
on REGENPORT

Browse verified PCR/PIR grades, real-time pricing, and request a quote directly on our platform.

Browse verified PCR/PIR grades, real-time pricing, and request a quote directly on our platform.

CONTACT OUR TEAM

CONTACT OUR TEAM

sales@e-connect.kr

sales@e-connect.kr

We typically respond within 24 hours.

We typically respond within 24 hours.

Technical
Datasheet

Technical
Datasheet

Sample
Request

Sample
Request

Get a Quote

Get a Quote

Check
Availability

Check
Availability

Regenport

Verified recycled plastic materials

for resin manufacturers

and compounders.

CONTACT US

+82 70-7594-2321

450, Gangnam-daero,

Gangnam-gu, Seoul 06123,

Republic of Korea

Privacy Policy

Terms of Service

All Posts

© 2026 REGENPORT Inc. All rights reserved.

Regenport

Verified recycled plastic materials

for resin manufacturers

and compounders.

CONTACT US

+82 70-7594-2321

450, Gangnam-daero,

Gangnam-gu, Seoul 06123,

Republic of Korea

Privacy Policy

Terms of Service

All Posts

© 2026 REGENPORT Inc. All rights reserved.

Regenport

© 2026 REGENPORT Inc. All rights reserved.

Privacy Policy

Terms of Service

All Posts

Find Your Recycled Material on

REGENPORT

Browse verified PCR/PIR grades, real-time pricing, and request a quote directly on our platform.

CONTACT OUR TEAM

sales@e-connect.kr

We typically respond within 24 hours.